Smart toilets are widely popular for their convenient functions, but they may encounter various faults during use. Understanding these common problems and their solutions can help you quickly restore the normal use of smart toilets.
1.Reasons for not flushing:
The water source valve is not open or the water pipe is blocked.
Electrical problems, such as power not connected or circuit failure.
Flushing component failure, such as solenoid valve or water pump damage.
Control panel or remote control failure.
Internal sensor failure.
Solution:
Check the water source: Make sure the water valve is fully open and the water pipe is not blocked.
Check the power supply: Confirm that the power plug is inserted correctly and the power switch is normal.
Check the components: Check whether the solenoid valve and water pump are working properly, and replace them if necessary.
Check the control panel: Make sure the control panel or remote control is working properly, and try to reset the system.
Check the sensor: Clean the sensor, calibrate or replace it if necessary.
2. Seat heating does not work :
Power problem or heating element failure.
Control panel settings are wrong.
Solution:
Check the power supply: confirm that the power supply is normal and check whether the heating element is damaged.
Check the settings: check whether the seat heating setting is turned on and adjust it to the appropriate temperature.
3.Reasons for automatic lid opening and closing failure:
Battery power is low.
Sensor failure or connection problem.
Solution:
Replace battery: Make sure the battery is sufficient or replace with new battery.
Check sensor: Clean the sensor and check if the connection is good.
4. Incomplete flushing causes:
The nozzles in the flushing system are clogged or worn.
Insufficient water pressure.
Solution:
Clean the nozzles: Clean the nozzles regularly to remove blockages.
Check the water pressure: Make sure the water pressure is normal. If there is any problem, contact the water company.
5. Idle mode cannot be exited Reason:
Control panel failure.
System settings problem.
Solution:
Restart the system: Try to restart the toilet, usually by turning off the power.
Check the settings: Check the system settings to make sure they are correct.
6. Reasons for scrubbing function not working:
The nozzle is clogged or the nozzle motor is faulty.
Electrical problem or wrong setting.
Solution:
Clean the nozzle: Clean the nozzle and its surrounding parts.
Check the electrical: Confirm that the electrical connection is normal and adjust the settings.
7. Reasons for smelling odor:
The pipe or drainage system is clogged.
Incomplete internal cleaning.
Solution:
Clean the pipe: Clean the drainage pipe and check if there is any blockage.
Clean the toilet: Clean the inside of the toilet regularly and use appropriate cleaning agents.
8. Reasons for overall abnormal operation:
Internal circuit failure.
Software system failure.
Solution:
Check the circuit:
Contact a professional maintenance person to check the circuit.
Update the software: Check if there is a system update and update it according to the instructions.
Summary
Smart toilets can fail for many reasons, and regular maintenance and timely problem handling can improve the life and performance of the device. If you encounter a problem that you cannot solve yourself, it is recommended to contact a professional repair service for a detailed inspection.
