1. Choose 1200℃ high temperature firing instead of 800℃ high temperature firing.
When we choose a toilet, it is best to choose a toilet fired at a high temperature of 1200°C. Its texture is tougher and less likely to be damaged during transportation or use. After all, the ceramic material is brittle and very easy to break!
High-temperature firing can also make the toilet more glossy, and its wear resistance will also be better!
It is not recommended to choose a toilet fired at 800°C. Although it is also fired at high temperature, the quality is indeed not as good as that fired at 1200°C!
2. Choose full glazing instead of partial glazing.
In fact, you will find that the inner wall of the toilet is generally relatively smooth, so that dirt can be drained easily without leaving any residue! Therefore, it is particularly important to fully apply glaze. To put it bluntly, it is equivalent to covering the toilet with a protective film, which can not only extend the life of the toilet, but also facilitate daily flushing!
The partially glazed ones are glazed on the places we see, such as the toilet drain outlet or even deeper places, there is no smooth glaze, so don’t choose this!
When you buy a toilet, you can touch the drain outlet to see if it is smooth!
3.Choose a wide seat circle, not a narrow seat circle
The toilet seat is also a science. From the long-term use experience, a wide seat is far easier to use than a narrow seat! A wider seat circle will make you more comfortable when sitting, and the supporting area will be larger, so you won’t feel uncomfortable.
The narrow seat circle makes it not so good to use. It feels so narrow that it will be very tight and uncomfortable when you sit on it!
4. Select the first-level water efficiency indicator light and do not select the second-level water efficiency indicator light.
It is said that it saves energy, and the same is true for mute! As for water efficiency, first choose the first-level water efficiency indicator light, which will save you money on bright water bills~
Compared with the second level water efficiency of the same period last year, the amount of water used per flush can effectively save 20% of water. It doesn’t actually save much if you look at it once, but the savings over the years are not a small amount!
5. Choose a slow-release cover instead of a non-slow-release cover.
The toilet cover is also a very important element. The slow-release cover will have a buffer in mid-air during the covering process. It will not be covered directly with a bang, but will be lowered slowly. This process does not require If you cover it manually, the sound will be very small!
As for the non-buffered cover, you need to cover it carefully every time, otherwise it will make a loud noise that will scare people!
Therefore, don’t let down your guard when it comes to covers. When buying, be sure to try again and again to see if it is a slow-release cover!
6. Choose well-known toilet water fittings instead of unknown brand water fittings.
The water parts of the toilet directly affect the service life of the toilet. High-quality water parts can be used for a longer time. During use, they will also feel heavy and you can feel that their quality is very good!
And those miscellaneous miscellaneous brand-name water fittings will only shorten the service life of the toilet. Various problems will begin to appear after three or two years of use, making it very troublesome to replace it! YBS BATH use the best quality water parts ,you guys could take a look at it.
